http://www.chainreactionhub.com/latest-news/554-five-futuristic-bikes-that-could-be-on-a-trail-or-road-near-you-soon
.-..-.-.-..-.
http://www.chainreactionhub.com/latest-news/674-eight-bikes-on-ebay-that-made-us-go-what-the
.-..-.-.-.-.-.-.-.-.
http://www.chainreactionhub.com/latest-news/790-eight-of-the-most-insane-bike-inventions-on-instructables
Bicycle wheel truing stand by ehsiung
This is a simple truing stand for bicycle wheels. It's no-frills so it might not appeal to professional bike mechanics but it's perfect for recreational bikers who might only build a few wheels a year. It's made from just a few pieces of steel so it's cheap, and it breaks down nicely for storage.
I made it at TechShop.
http://www.techshop.ws
To create this wheel truing stand you’ll need the following raw materials:
- 36 in. x 2 in. x 1/8 in. steel angle
- 36 in. x 1 in. x 1/8 in. steel angle
Steel angle (aka angle iron) is just a length of steel that is bent at a 90 degree angle along its long axis, forming an L in cross-section. It’s pretty cheap and you can get the two pieces you need from your big-box hardware depot for about $20.
You will also need the following tools (all of which are available at TechShop):
- Angle iron bender/notcher
- Vertical bandsaw
- Disk grinder or hand file (to clean up rough edges)
- MIG welder
- C-clamps, welding magnets
These are tools that I had available to me at TechShop so that’s what I used. This wheel truing stand is pretty simple so other metalworking tools and techniques can be used to build this project.
http://www.instructables.com/id/Bicycle-wheel-truing-stand/
http://www.instructables.com/
No hay comentarios:
Publicar un comentario